EMAX-OUT DP4

DP output card

EMAX-OUT DP4

The EMAX-OUT-DP4 is a professional-grade expansion card engineered for high-resolution visualization and multi-display arrays. Featuring four independent DisplayPort interfaces, this module provides a native, high-bandwidth signal path that is essential for driving 4K monitors and high-refresh-rate projection systems without the color compression or latency found in converted signal chains.
INQUIRY
Features
Specifications
Diagram
Drawing
Downloads

●  4 DP interface, 4 3.5mm audio interface;
●  Supports hot swapping and simultaneous switching of audio and video signals;
●  Support analog audio and DP embedded audio selection input;
●  Support the EDID reading function;
●  Compatible with DP1.1 standards;
●  Maximum supported resolution:
    HDPC: 1920x1200P@60Hz ,
    HDTV: 1920x1080P@60Hz .

Parameter Name EMAX-OUT DP4
Protocol DP 1.1 protocol;
Video Gain 0 dB
Pixel bandwidth 165MHz, full digital
Interface bandwidth 2.25Gbps, full digital (total 6.75Gbps, each color is 2.25Gbps)
Supported resolution 800x600@60, 1024x768@60, 1280x720@60, 1280x768@60, 1280x800@60, 1280x960@60, 1280x1024@60, 1360x768@60, 1366x768@60, 1440x900@60, 1600x900@60, 1600x1200@60, 1920x1080i@50, 1920x1080i@60, 1920x1080P@60, 1920x1200P@60;
Clock jitter <0.15 Tbit
Bit rise time <0.3Tbit (20%--80%)
Bit descent time <0.3Tbit (20%--80%)
Maximum transmission delay 5nS(±1nS)
Interface 4x DP interface, 4x 3.5mm audio interface
Signal strength T.M.D.S. +/- 0.4Vpp
Min/Max level T.M.D.S. 2.9V/3.3V
Impedance 50 Ω
EDID N/A
Maximum DC bias error 15mV
Suggested maximum input/output distance Maximum output of 7 meters, within 1600x1200@60 (It is recommended to use certified DP dedicated wire, such as Molex TM wire)
Product weight About 0.5KG
Maximum power consumption 15W

Free access

Submit